產品詳情

  • 產品名稱：Buehler鑲嵌機

  • 產品型號：SimpliMet 3000型
  • 產品廠商：標樂&威爾遜
  • 產品文檔：
你添加了1件商品 查看購物車
簡單介紹：
Buehler鑲嵌機SimpliMet 3000型適用於具有多種鑲嵌樣需求的實驗室用戶。 Buehler鑲嵌機SimpliMet 3000型采用預編程記錄各種鑲嵌方法，可對不同尺寸的鑲嵌樣進行重複製作。
詳情介紹：

Buehler鑲嵌機SimpliMet  3000型產品特點：


可編程性降低複雜性

· 適用於有多種鑲嵌樣需求且鑲嵌尺寸不同的實驗室。

· 存儲和撤銷5種不同的程序，降低複雜性和消除錯誤， 提供靈活性來滿足多變的實驗室要求

通過選擇不同尺寸的模具來優化各種各樣的試樣大小。節約鑲嵌介質並提升鑲嵌質量


Buehler鑲嵌機SimpliMet  3000型產品技術規格：


Specifications

 

Operation

Automatic electro-hydraulic

Power Source

85-264VAC, 50/60Hz, 1 phase

Molding Pressure

1200 - 4400psi [80 - 300bar] in 100psi [5bar] increments

Molding Temperature

120 - 360°F [50 - 80°C] in 20°F [10°C] increments

Heating Power

1500Watt @ 115/230VAC

Heating Time

0 - 20 minutes in 10 second increments

Cooling Time

0 - 30 minutes in 10 second increments

Mold Type

Cylindrical, including upper and lower rams and duplex mold spacer

Closure Type

Insluated bayonet with piston indent

Mold Diameters

1in, 1.25in, 1.5in, 2in, 25mm, 30mm, 40mm, 50mm

Touch-pad Controls

On/Off; Heat Time; Cool Time; Molding Temperature; Molding Pressure; Mold Size; Ram Up/Down; Maunal Cool; Cycle Start; Cylinder Open; Unit of Measure; Language and also including Thermoplastic; Load and Save Methods

Units of Measure

Imperial or Metric

Water Flow Rate

0.5gal/min [2ℓ/min] minimum

Water Pressure

45-75psi [3-5bar]

Control Voltage

24VDC

Method Programmability

4 Buehler, Preprogrammed Methods per mold size; 25 User Definable Methods

Preload Pressure

0 - 400psi [0 - 30bar] in 50psi [5bar] increments

Thermoplastic Function

Automatically sets correct parameters for thermoplastic resins such as TransOptic™ and cools the mount in a controlled, linear fashion

Compliance

In accordance with EC Directives


姓名：
電話：
您的需求：